YUNEEC EGO CRUISER

TROUBLESHOOTING

GEAR

A run down of the parts of the board.


CHARGE SETUP


SYNCING CONTROLLER AND BOARD / RESET
Use this procedure to initially sync the board and remote.
Use this also if the board seem to be slower than usual, even if set to speed mode.
Use this as a general reset if the board suddenly is no longer going.


FEATURES


SPECIFICATIONS

EMERGENCY PRINTOUT
Just the basics to reset the board

SPARE PARTS


Controller

MOTOR
Motor Watts 400 W



Battery Management Board (BMS)

Electronic Control Unit (ECU)

BATTERY
Battery Type Lithium Ion (21 pieces Panasonic NCR18650PF)
Battery Dimensions 500mm x130mm x50mm
Battery Pack Amps 7.8Ah
Battery Volts 29 v
Battery Watt Hours 202Wh

Weight 900 grams
Model: NCR18650PF
Manufacturer: Panasonic
Country of Origin: Japan
Chemistry: NCR
Rated Capacity: 2700mAh min.
Minimum Capacity: 2750mAh (0.54A discharge at 20°C)
Typical Capacity: 2900mAh (0.54A discharge at 20°C)
Nominal Voltage: 3.6V
Discharge End Voltage: 2.5V
Standard Charging Current: 1.35A
Charging Voltage: 4.20±0.03V
Standard Charging Time: 4.0hours
Max. Continuous Discharging Current: 10A
Internal Resistance: less than 35mΩ
Weight: 48.0g maximum





BOARD 960mm x 240mm
Ego2 Deck


TRUCKS
Rear
Front

WHEELS 90mm diameter / 52mm width / 83A



FULL MANUAL





Upgrades

Flipsky Dual FSESC4.20


VESC TOOL



Flipsky Remote and Receiver

Wheels: 145mm
Motor Mount
Gear Ratio: 15T 44T (60T)
Drive Belt: Banshi 345-5M

Motors
BDUAV 6374-170KV